M sensor
Self-powered Fixed-temperature Fire Detection Sensor Self-powered Valve Open/Close Detection Sensor Self-powered Door Open/Close Detection Sensor Self-powered Object Movement Detection Sensor Self-powered Over-pressure Detection SensorM switch
Self-powered Wireless Switch SystemM call
Self-powered Emergency Bell System Guest Pager SystemMonitoring Systems
Signal Monitor System Sensor Hub · Smart Safety Alert Web & PC Monitoring SystemEco Products
DPF Fuel Injection Actuator Thermoelectric Dehumidifier / Panel CoolerPower Safety Platforms
GIS Substation Power Safety Platform Extra-high-voltage Switchgear Power Safety Platform Distribution Panel Power Safety Platform Cable Joint Power Safety Platform Data Center & ESS Power Safety PlatformEmergency Safety Platforms
Emergency Call Device Platform Emergency Bell Monitoring Platform Wireless Call Platform Device Control Platform Smart Safety Alert Platform Field CasesPower Safety Platforms
A system that monitors signs of fire and electrical leakage in electrical rooms of data centers and large buildings via SCADA, using self-powered sensors and an insulation monitoring device
In distribution panels of data center and ESS electrical rooms, overheating of breakers and joints and electrical leakage lead to major failures.
Signs of fire must be detected early without running new wiring to every panel.
Temperature sensor80 ℃ alarm
Door sensorPanel opening
Insulation monitoring deviceIMD1000
RepeaterMWSR2-900
Signal MonitorMWSM-700
SCADAControl room monitoringRanges are based on open field with no obstacles. Each added repeater extends the range by approx. 1 km.
Model MWSF-100
| Size | W77 × D56 × H47.7 mm |
|---|---|
| Weight | 82 g |
| Frequency | 920.700 MHz (FSK) |
| Transmission range | approx. 100 m (open field) |
| Operating temperature | approx. 75 – 85 ℃ or above |
| Power | Self-powered (no battery) |
| Dust · water protection | IP57 |
Model IMD1000
| Purpose | Insulation monitoring |
|---|---|
| System voltage | AC 0 – 790 V, DC 0 – 1,000 V |
| Voltage extension | AC max. 1,150 V / DC max. 1,725 V |
| Communication | RS-485 (Ethernet option) |
| History management | System / Alarm 255 each |
Model MWSR2-900
| Size | W115 × D115 × H30 mm |
|---|---|
| Weight | 167 g |
| Frequency | 920.7 / 447.9 MHz (FSK) |
| Antenna | External antenna × 2 |
| Tx/Rx range | approx. 1 km (open field) |
| Range extension | +approx. 1 km (open field) |
| Display | FND 3-digit, LED (Rx · Tx · Power) |
| Power | DC 12 V 1 A adapter |
Model MWSM-700
| Size | W258 × D107 × H34 mm |
|---|---|
| Weight | 497 g |
| Frequency | 920.7 / 447.9 MHz (FSK) |
| Antenna | External antenna × 2 |
| Reception range | approx. 1 km (open field) |
| ID registration | max. 999 |
| Signal storage | Up to 10 overlapping signals |
| Display | FND 5-digit LED |
| External terminals | RS-485, beacon light, speaker, power |
| Power | DC 12 V 1 A adapter |
Model —
| Size | W600 × D2,000 × H600 mm |
|---|---|
| Data collection unit | Built-in Signal Monitor |
| Data processing unit | IED (IEC 61850) |
| DC supply voltage | DC 125 V |
| AC supply voltage | AC 220 – 380 V (60 Hz) |
| Network | GOOSE Optical communication (100 Mbps) |
Fire detection at breakers and joints of distribution panels, door open/close detection on key distribution panels and emergency bells for emergency notification are installed, and power safety is monitored over a SCADA network via IEDs.
Early detection of fire signs and activation of emergency and event alarms
SCADA integration via a dedicated monitoring panel with a built-in data collection unit (Signal Monitor)
Insulation monitoring on the same screen
CONTACT MPIA
Data Center & ESS Power Safety Platform
A system that monitors signs of fire and electrical leakage in electrical rooms of data centers and large buildings via SCADA, using self-powered sensors and an insulation monitoring device
